When discussing the classic Browning 2000 shotgun, appreciators of fine firearms often find themselves caught in the nostalgic yet practical appeal of this semi-automatic marvel. Designed by the esteemed Browning Arms Company, this gun, affectionately known as B2000, was produced from 1973 to 1980.
While the Browning 2000 holds its place in shooting history, it was not without issues. It’s important to recognize these common issues, so you’re aware of what to lookout for and how to solve these problems.
Feeding Problems
Problem Overview
One of the common issues with the Browning 2000 is the feeding problems. These can be mainly attributed to a worn-out or aftermarket magazine spring that does not provide the necessary force to feed the shells properly.
Fixing the Issue
The prime fix for this issue is replacing the faulty magazine spring. It’s essential to use a proper high-quality spring designed specifically for your Browning 2000. Just follow these simple steps.
- Remove the magazine cap at the end of the barrel.
- Pull the barrel off from the front, removing it from the receiver.
- The spring is located behind the magazine follower. You can remove it using needle-nose pliers.
- Inspect the spring, replace it if necessary.
- Reassemble the shotgun as it was before.
Ejection Problems
Problem Overview
In some shooting scenarios, Browning 2000 users have reported the shotgun failing to eject spent shells correctly. The problem generally arises from a worn-out ejector, a fundamental component in ensuring a smooth ejection process.
Fixing the Issue
To fix ejection problems with your Browning 2000, the ejector might need replacing. Here’s a detailed guide on how to do it.
- Open the action and lock it to the rear.
- Use a punch tool to drive out the cross-pin that holds the ejector in place.
- Once the pin is out, slide the ejector out.
- Inspect the ejector for any wear or damage. If necessary, replace it with a new one.
- Reassemble, making sure to replace the cross-pin correctly to secure the new ejector in place.
General Maintenance Problems
Problem Overview
Due to its somewhat intricate design, the Browning 2000 requires regular and careful maintenance to keep it operating efficiently. However, many owners struggle with disassembly and reassembly of the shotgun, which can lead to various function hindrances.
Fixing the Issue
Maintenance is all about familiarity with your shotgun’s inner workings. To better handle, disassemble, and reassemble your Browning 2000 shotgun, follow the steps below:
- Ensure the gun is unloaded.
- Take off the barrel by unscrewing the magazine cap and sliding the barrel out.
- Remove the forend by sliding it off over the magazine tube.
- Slide out the bolt handle, allowing the bolt assembly to slide off from the receiver.
- For a deeper clean, you can disassemble the trigger group by pushing out the two pins that hold it in place.
- When reassembling, reverse the disassembly steps.
Final Word
While the Browning 2000 is an excellent shotgun that many shooters love, it is not exempt from issues. However, as long as you are aware of some of the common Browning 2000 problems and their respective solutions, you should be more equipped to handle any situation that arises with your firearm. Remember, practice and familiarity with your weapon will always lead to smoother operation and maintenance experiences.
Frequently Asked Questions
How many shells will a Browning 2000 hold?
The Browning 2000 shotgun has a magazine capacity of four shells. This includes three shells in the magazine tube and an additional shell in the chamber. It is important to note that this capacity may vary depending on the specific model and modifications made by the user.
How many Browning 2000s were made?
Exact production numbers of the Browning 2000 shotgun are not readily available. However, it is estimated that between 1967 and 1984, Browning produced approximately 49,758 units of the Browning 2000. This figure includes both 12-gauge and 20-gauge variants.
What is a Browning 2000?
The Browning 2000 is a semi-automatic shotgun manufactured by Browning Arms Company. It was produced between 1967 and 1984 as an attempt to introduce a modernized semi-automatic shotgun to the market. The Browning 2000 featured an innovative gas-operated system, a lightweight design, and a distinctive appearance.
Where was the Browning 2000 made?
The Browning 2000 was initially manufactured in Belgium. Browning Arms Company, a subsidiary of Fabrique Nationale (FN), produced the shotgun at their Herstal facility in Belgium. Later on, production was shifted to Miroku Corporation in Japan. This move was primarily driven by the need for cost-effective manufacturing processes.
I've learned a lot along the way and I'm always eager to share my experiences with others. I firmly believe in the importance of ethical hunting practices and and sustainable use of our natural resources, and I do my best to promote these principles in all of my adventures. Hunting is more than just a hobby for me, it's a way of life.
- Walther P22 vs SIG P322: Comparing Popular .22 Caliber Pistols - October 30, 2024
- Vortex Sparc vs Sig Romeo 5: Battle of the Red Dot Sights - October 30, 2024
- SIG XTen vs M&P 10mm: Ultimate Firearm Showdown - October 29, 2024
