The Springfield XDM series is among the most popular in the world of handguns. Known for their versatility and efficiency in a wide array of scenarios, these firearms offer superior ergonomics and consistent performance. However, no firearm is without its potential issues and the Springfield XDM 10mm is no exception. This article aims to delve into the issues users face with this model, along with some suggested resolutions.
Trigger Weight Issue
Problem
One of the most common problems reported by Springfield XDM 10mm owners involves the trigger weight. Some users argue that the trigger pull is a bit too heavy for precise shooting. This resistance in the trigger can decrease the speed and accuracy of the shooter.
Solution
This issue can be resolved by installing a lighter trigger kit, which can be done either professionally or personally. Following is a step by step guide;
- First, unload your gun and ensure it is safe to work on.
- Next, you will need to disassemble the gun. Be sure to refer to your owner’s manual for accurate instructions.
- Once disassembled, replace the original trigger system with the new, lighter kit. This typically involves replacing the spring and other internal components.
- Reassemble the handgun and ensure all parts are in their proper place and secure.
- Finally, test the new trigger system in a safe environment to ensure it functions properly.
Ammo Feeding Issue
Problem
Some users have reported issues relating to the ammo feeding in their Springfield XDM 10mm, particularly with downward-angled feeding which occasionally leads to misfires.
Solution
This problem primarily arises from the magazine’s follower’s prematurely steep angle. Making a minor modification to the follower can alleviate this issue.
- Firstly, empty and disassemble the magazine.
- Adjust the angle of the follower to be less steep, allowing the ammo to feed more directly into the chamber.
- Once the angle is adjusted, reassemble the magazine and load it back into the firearm.
- Take your Springfield XDM 10mm to a safe place for a test firing. Make sure the ammo feeds correctly before relying on the firearm for self-defense or hunting.
The Fluff and Buff
Many gun owners swear by the process known as “fluff and buff” as a preventative maintenance routine. The Springfield XDM 10mm tends to have a break-in period, and the fluff and buff can expedite this process.
Procedure
- Completely disassemble the firearm, placing the components out in front of you.
- Inspect each part for signs of excessive wear or burrs which can be filed down gently. Do not overdo it, you only want to remove rough edges or obvious manufacturing defects.
- Make sure to buff the ramp and the inside of the barrel throat. Polish all of the contact points using a dremel or flitz.
- Dry off the pieces and lubricate them as per manufacturer’s guidance before reassembling the firearm.
Problems Relevant to New Shooters
Bear in mind that some issues may not be with the gun itself, but is a result of user unfamiliarity. New shooters may experience perceived problems with the Springfield XDM 10mm, due to lack of experience such as poor sighting, stiffness in handling, or unwieldy recoil. These issues are typically alleviated through practice, familiarization with the weapon, and possibly professional training.
Remember, firearms are dangerous tools and it’s essential to treat them with respect and caution. Always prioritize safety when using or maintaining your Springfield XDM 10mm.
Frequently Asked Questions
1. Is the XDM 10mm discontinued?
No, the Springfield XDM 10mm is not discontinued. It is still in production and readily available in the market. Springfield Armory continues to offer the XDM 10mm as a reliable and popular option for gun enthusiasts and professionals.
2. Is the XDM a good carry gun?
Yes, the XDM series, including the 10mm variant, is widely regarded as an excellent choice for a carry gun. The XDM’s compact size, ergonomic design, and reliable performance make it a popular option among concealed carry permit holders. Its features, such as the interchangeable backstraps and grip safety, ensure a comfortable and secure grip for increased control and accuracy.
3. What is the retail price of the XDM Elite 10mm?
The retail price of the Springfield XDM Elite 10mm can vary depending on the specific model and any additional features or accessories included. On average, the price ranges from around $600 to $800. However, prices may vary among different retailers, so it’s recommended to check with local gun shops or reputable online sellers for accurate pricing information.
4. What does the “M” stand for in Springfield XDM?
The “M” in Springfield XDM stands for “Match” or “Match-grade.” This denotes that the XDM series is designed and built to provide superior accuracy and precision. The match-grade barrel, enhanced trigger, and improved slide design contribute to the XDM’s exceptional performance during competitive shooting or self-defense scenarios.
- EOTech EXPS3-0 vs EXPS3-2: Which Sight is Right for You? - November 1, 2024
- Steiner MPS vs Aimpoint ACRO: Which Optic is Superior? - October 31, 2024
- Aimpoint PRO vs Duty RDS: Which is the Best Optic Choice? - October 31, 2024